[. . . ] 1200mm Model : Unhook the drawers from the tracks B by allowing the drawer blocks to rotate in allignment to the drawer slit (the C blocks are located at the base of the drawers, two on each side). [. . . ] : The brackets H for final fixing of the oven are supplied ready-mounted, but they can be adjusted to the depth required as follows: a. Move the brackets H to the depth required (the brackets must be positioned so that, when installation has been completed, the oven frame is in line with the side drawers). Check that the door is not obstructed in any way by the front piece, and then install the oven, otherwise b1. Place the cabinet in the selected area and check that the workbench J is perfectly level (achieve levelling by regulating the cabinet legs F). [. . . ] Schroef op de schroeven D (6 schroeven voor het model van 1200 mm, 4 schroeven voor het model van 900 mm) de bijgeleverde stelpootjes F (het pootje bestaat uit twee op elkaar geschroefde delen, hierdoor is het indien nodig mogelijk de hoogte van het pootje te regelen en kan de structuur perfect waterpas worden gezet). [. . . ]